Kuvaus
Vauhti FC Powder COLD for all snow types, excellent in cold conditions to reduce dry friction.
Base preparation for Vauhti FC powders:
- Clean the ski base thoroughly with Vauhti Clean&Glide cleaning and maintenance agent.
- Use an UF, HF or LF RACE product suitable for the snow type and humidity as the base wax.
- Scrape and brush the base wax layer carefully, start with roster or brass brush and polish with nylon brush.
Instructions for cold conditions:
- Iron the powder in by quick (approx. 7-10 sec.) strokes; the iron temperature must be approx. 170180°C. Roto cork the ironed powder surface while still warm, at low drill RPM and light pressure. Only two or three strokes from ski tip to tail are required.
- Cool the skis thoroughly and carefully scrape away excess powder
- Brush by roto horsehair brush. Continue with roto nylon brush until the surface is even and glossy.
o If no roto tools are available, clean natural cork can be used for fixationrub the surface vigorously and hand brushes for brushing – use a roster brush to open the base and a nylon brush to polish the surfaces.
